• All units include two lead wires, one pack (4) electrodes, manual and battery.
• ReliaMed® electrotherapy units utilize standard lead wires and “pigtail”-style electrodes
• All ReliaMed® Electrotherapy units come in hard-sided protective plastic cases
• All Digital ReliaMed® units (TENS, EMS and IF) have a patient compliance feature that allows the prescribing doctor to monitor the patient’s usage of the device
• All ReliaMed® units have protective caps over the amplitude adjustment knobs to prevent unintended changes to the pulse amplitude
• HCPCS E0720
Channel: Dual; isolated between channels
Pulse Intensity: Adjustable 0-80 mA peak into 500 Ù load each channel, constant current
Pulse Rate: 1-160 Hz (adjustable), 1 Hz/step (1-20 Hz), 5 Hz/step (20-160 Hz)
Pulse Width: 50 ́s – 260 ́s (adjustable), 10 ́s/step
Patient Compliance Meter: Shows the treatment times in hours
Patient Lock System: Prevents the user from changing any fixed parameters set by the physician or licensed practitioner
Software Ramp Up: By changing mode, the output will reset to zero; then ramp up to its original setting intensity. This will protect users from a sudden surge.
Timer: 15-, 30- or 60-minute, or continuous mode
LCD: Shows modes, pulse rate, pulse width, timer and CH1/CH2
Analog TENS Function modes
B: Cycle Bursts, 2 bursts/sec., 9 Pulses/burst, and 100 Hz; adjustable width.
C: Continuous mode. Pulse rate, pulse width and intensity are adjustable.
M: Modulated Width.
Pulse width is automatically varied in a six-second interval. The modulation range of pulse width is from setting value to 35% less than the control setting value, then returns to the setting value. Rate, width and intensity are fully adjustable. Wave form: Asymmetrical bi-phasic square pulse.
