Cutimed^® Siltec B - Self-Adherent Foam Dressing - an assortment of silicone coated foam dressings. Cutimed^® Siltec B is a sterile, absorbent polyurethane foam dressing for traumatic dressing changes that contains super-absorbent stripes which absorb and lock wound exudate. The wound contact surface is a perforated silicone layer that allows adherence to the peri-wound skin but not to the moist bed or to newly formed tissue. This minimizes trauma and pain during dressing changes. The outer film is water-repellent, yet permeable to oxygen and vapor. The foam dressing and the super-absorbent stripes are designed to absorb and to lock away excess wound fluid inside the dressing, promoting a moist wound environment and minimizing the risk of maceration. Cutimed^® Siltec B is highly conformable and provides protection of the wound site. Cutimed^® Siltec B leaves no residues in the wound. The dressing reliably retains wound exudate, even under compression. If necessary, the dressing can be cut to size. Cutimed^® Siltec B has an additional silicone adhesive border, that allows secure and gentle fixation of the dressing.

Manufacturer: BSN Medical

Brand: Cutimed^®

Model: Siltec B

Indications: Cutimed^® Siltec B is indicated for exuding wounds with low to high exudate levels such as;

• Venous & arterial leg ulcers
• Pressure ulcers
• Diabetic gangreens
• Surgical incisions
• Skin grafts
• Lacerations
• Abrasions
• Other wounds with low to high exudate levels

Contraindications: Do not use on patients with a known sensitivity to any of the product components.

Warnings and precautions: Cutimed^® Siltec B is packaged for single use. Do not re-use or re-sterilize as there is a risk of transmission of body fluids or contaminated tissue between patients. Do not use if pouch is open or damaged. Discard open or unused materials. The wound should be inspected for signs of infection and treated according to clinical practice if required.

For external use only. Do not use with oxidizing solutions such as hypochlorite or hydrogen peroxide.
Remove dressing prior to radiation therapy.

Application/Directions for use:

1. Clean the wound according to good clinical practice.
2. Make sure the surrounding skin is dry.
3. Choose an appropriate dressing size that covers the wound and overlaps the wound edges.
4. Open the pouch and take out the dressing. Ensure sterility.
5. Remove protective film and apply with the adherent side towards the wound.
6. Avoid stretching the dressing.
7. Depending on wound location, it may be appropriate to apply additional dressing fixation.
8. If necessary, Cutimed^® Siltec B can be used in combination with other dressings e.g. Cutimed^® Sorbact (in case of infected wounds) or Cutimed^® Gel (for dry, necrotic wounds).
9. Cutimed^® SIltec B may be used on an infected wound in addition to antimicrobial therapy under medical supervision.
10. Cutimed^® Siltec B can remain in place for up to seven days, depending on wound conditions and exudate levels. It is recommended to change the dressing every 24 hours initially, moving to less frequent changes as necessary.
11. Carefully remove any additional dressing fixation and gently remove Cutimed^® Siltec B from the wound and discard appropriately.
12. If required, cleanse the wound prior to application of each new dressing.

Storage: Cutimed^® Siltec B should be stored in dry conditions. Do not expose to direct sunlight.

Options:
3" x 3" - Box of 10 (7328400) GTIN: 4042809287554
4" x 4" - Box of 10 (7328405) GTIN: 4042809553901
5" x 5" - Box of 10 (7328401) GTIN: 4042809287578
6" x 6" - Box of 10 (7328402) GTIN: 4042809287592
7" x 7" - Box of 5 (7328403) GTIN: 4042809287615
9" x 9" - Box of 5 (7328404) GTIN: 44042809287639

• Size options (each sold separately);
  
  3" x 3" (7.5 cm x 7.5 cm) - Box of 10 (7328400)
  5" x 5" (12.5 cm x 12.5 cm) - Box of 10 (7328401)
  6" x 6" (15 cm x 15 cm) - Box of 10 (7328402)
  7" x 7" (17.5 cm x 17.5 cm) - Box of 5 (7328403)
  9" x 9" (22.5 cm x 22.5 cm) - Box of 5 (7328404)

Indications
Cutimed^® Siltec B is indicated for exuding wounds with low to high exudate levels such as;
Venous & arterial leg ulcers
Pressure ulcers
Diabetic gangreens
Surgical incisions
Skin grafts
Lacerations
Abrasions
Other wounds with low to high exudate levels

Contraindications
Do not use on patients with a known sensitivity to any of the product components.

Warnings and precautions
Cutimed^® Siltec B is packaged for single use. Do not re-use or re-sterilize as there is a risk of transmission of body fluids or contaminated tissue between patients. Do not use if pouch is open or damaged. Discard open or unused materials. The wound should be inspected for signs of infection and treated according to clinical practice if required.

For external use only.

Do not use with oxidizing solutions such as hypochlorite or hydrogen peroxide.

Remove the dressing prior to radiation therapy.

Application/Directions for use
1. Clean the wound according to good clinical practice.
2. Make sure the surrounding skin is dry.
3. Choose an appropriate dressing size that covers the wound and overlaps the wound edges.
4. Open the pouch and take out the dressing. Ensure sterility.
5. Remove protective film and apply with the adherent side towards the wound.
6. Avoid stretching the dressing.
7. Depending on wound location, it may be appropriate to apply additional dressing fixation.
8. If necessary, Cutimed^® Siltec B can be used in combination with other dressings e.g. Cutimed^® Sorbact (in case of infected wounds) or Cutimed^® Gel (for dry, necrotic wounds).
9. Cutimed^® SIltec B may be used on an infected wound in addition to antimicrobial therapy under medical supervision.
10. Cutimed^® Siltec B can remain in place for up to seven days, depending on wound conditions and exudate levels. It is recommended to change the dressing every 24 hours initially, moving to less frequent changes as necessary.
11. Carefully remove any additional dressing fixation and gently remove Cutimed^® Siltec B from the wound and discard appropriately.
12. If required, cleanse the wound prior to application of each new dressing.

Storage
Cutimed^® Siltec B should be stored in dry conditions. Do not expose to direct sunlight.