|
|
|
|
Special Order Item Corflex Lace Align Lumbosacral Plus Orthosis (LSO Plus) - Delivers motion control in multiple planes for enhanced spinal stabilization and decompression following injury or surgery. Movable lateral panels help restrict side bending while rigid anterior and posterior panels limit flexion and extension and help protect the vertebrae and surrounding tissues. Hand loops and dual Power Pull Closures™ make the brace easy to apply and deliver patient-controlled compression to the abdominal cavity to help unload the spine and support musculature. Slide- to-adjust sizing feature significantly reduces inventory requirements with only two sizes needed to fit the majority of patients. This innovative design incorporates Outlast®, a hi-tech fabric that provides proactive temperature regulation to help manage heat and moisture beneath the brace for all-day comfort. Removable back panel allows brace to easily “step down” to a traditional back brace, offering moderate support and increased customer value.
Features:
- Rigid posterior panel stabilizes from L1 through lumbo-sacral juction and can be adjusted with heat to achieve a custom fit; hand loops and Power Pull Closures allow patients with limited upper extremity strength and dexterity to independently apply the brace
- Constructed of nylon, breathable CoolMesh™ with Outlast, molded pull tabs, heat moldable ABS posterior panel, HDPE anterior panel and hook and loop closures
Quantity: 1
Color: Black
Material: Constructed of nylon, breathable CoolMesh™ with Outlast, molded pull tabs, heat moldable ABS posterior panel, HDPE anterior panel and hook and loop closures
Manufacturer: Corflex
Indications: Indicated for lower back pain, sprains or strains, spinal stenosis, spondylosis, spondylolysis, spondylolisthesis, degenerative disc disease, bulging or herniated discs, burst fractures, facet syndrome and post-operative stabilization following laminectomy, foraminotomy, IDET procedures, discectomy, fusion or decompression
Cleaning & Care: Product should be hand washed only using warm water and detergent for delicate fabrics, repeatedly rinsed and line dried only. Do not use bleach or place in a dryer. Plastic/foam back panels can be cleaned using warm water and a mild disinfectant. Do not immerse brace in liquids.
Options: Small/Medium (35-3211-000) UPC: 630746097660 Large/X-Large (35-3213-000) UPC: 630746097677
Sizing Guide: Measurement taken from waist or hip circumference. Use the larger of the two circumferences when selecting brace size. Small/Medium - 30"-45" Large/X-Large - 40"-60"
Related Products: Corflex Lace Align™ Spinal TLSO Corflex Lace Align Lumbosacral Orthosis (LSO) Corflex Lace Align Lumbar Orthosis (LO)
Lace Align Fast to Fit Sizing
- Options:
Small/Medium (35-3211) UPC: 630746097660 Large/X-Large (35-3213) UPC: 630746097677
Sizing Guide: Measurement taken from waist or hip circumference. Use the larger of the two circumferences when selecting brace size.
Small/Medium - 30"-45" Large/X-Large - 40"-60"
Prescription Form
Application Instructions: The Lace Align Spinal Orthosis incorporates a back panel that is preset at 5˚ of lordosis and can be adjusted using a heat gun. Adjustments should be made by a therapist or orthotist trained in fitting and molding high temperature plastics.
1. Adjusting the Back Panel: A. Fabric cover must be removed prior to adjusting.Flexing/bending the back panel will aid in removal and reapplication of the fabric cover. B. Hold heat gun 3-5” from the surface and apply heat to the plastic side of the back panel for 30-45 seconds, moving the gun back and forth continuously. Never apply heat to the foam surface. Adjust curvature as needed and hold until cool (approx. 30 seconds). C. Never mold the back panel directly to the patient. Allow to fully cool before reapplying fabric cover.
2. Determining Appropriate Belt Length: A. Measure patient’s waist and hip circumference. Use larger of the two circumferences when selecting brace size. B. Braces are pre-adjusted to fit the following hip/waist circumferences. S/M: 35” circumference.; L/XL: 50” circumference. Adjust as needed.
3. Setting Belt Length: A. Open brace and lay flat. Remove Lateral Extension Panels (not shown, LSO Plus model only). B. Peel up edge of belt and slide until the desired length is achieved. C. Fold belt end over and press to secure hook and loop closure. Repeat for opposite side, both right and left must be adjusted equally for proper brace performance. D. LSO Plus Only: Reapply Lateral Extension Panels to the inside of the belt at midline.
4. Preparing/Resetting the Brace: A. Prior to each application make sure the brace is extended. B. Place the pull-tabs 2” from each side of the back panel and pull the ends of the belt away from each other to ensure it is fully lengthened.
5. Positioning the Brace: A. Center the back panel on the lower back. B. Slide fingers through the loops on the belt ends to assist with application.
6. Applying the Belt: A. Wrap belt around abdomen and overlap ends, right over left. Press firmly to engage hook and loop closure. B. When applied correctly, brace should fit snug at top and bottom. If there is a gap, reapply and angle ends to ensure a snug fit at upper/lower edges. C. LSO Plus Only: Lateral panels should be located on the midline of the belt, above the iliac crests, with the narrow end pointing forward.
7. Tightening the Brace: A. Slide thumbs through pull-tab holes and pull them away from the body. Right pull-tab controls lower compression and left pull-tab controls upper compression. B. Apply tension until desired support is achieved.
8. Adjusting and Removal: A. Wrap pull-tabs around the front of the brace, securing to loop on the outside of the brace. B. For comfort while seated, lessen tension on the upper portion of the back panel (left pull-tab). Reapply tension upon rising. C. When removing the brace, lift pull-tabs to release tension and relocate them to the ready position as shown in Step 1. |
|
|
|
|
|
|
|